Hannah Boruchov
← Northwestern University
Engineering

Formula SAE Intake Systems

Designed and built carbon fiber intake systems for two Formula SAE cars, and led the intake team.

+7%plenum volume
+11%air filter area, with a cheaper filter
2 monthsahead of schedule on manufacturing
Formula SAE Intake Systems
Role
Intake Systems Lead
Where
Northwestern Formula Racing
When
Sep 2020 to Apr 2022
Team
Powertrain team
Skills
SolidWorksProject managementDesign for manufacturingRicardo WAVEAnsys FluentCarbon fiber layupRapid prototyping

Problem

The intake has to feed as much high-pressure air into the engine as competition restrictor rules allow, while staying light and buildable by students.

Insight

The hardest part is removing the intake from the mold. I sourced a more effective and inexpensive mold release and researched improved manufacturing methods for the carbon fiber layup.

Options and tradeoffs

Tuned runner length with Ricardo WAVE engine simulation, checked airflow per cylinder with Ansys Fluent CFD, and transitioned to a better carbon fiber layup process.

Result

Increased plenum volume by 7% to improve engine performance, increased air filter surface area by 15% , and made the team's first carbon fiber intake that did not implode on initial testing. Manufacturing also started 2 months ahead of schedule.

What I did

Context

Member of the intake team from Sep 2020, lead from Sep 2021 to Apr 2022. The intake sits on the powertrain and is one of the most rules-constrained parts of the car.

Design

Ricardo WAVE 1D engine simulation to tune runner length, then Ansys Fluent CFD to check that each cylinder got even airflow.

Manufacturing

MDF molds cut on the CNC, an 8-ply carbon prepreg layup cured at 270°F for 90 minutes, and Nylon 12 printed runners. A better mold release and larger injector port fillets made the parts cheaper and stronger.